CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
S017
CAUTION:
Hazardous moving fan blades nearby.
Note: Air baffle is not available for some server models.
Remove the air baffle
Use this information to remove the air baffle.
“Read the
installation
Guidelines” on
page 79
“Power off the
server for this
task” on page
11
Note: Depending on the model, your server might not have an air baffle installed.
Before removing the air baffle:
1. Remove the top cover. See “Remove the top cover” on page 89.
2. If there is a RAID super capacitor module installed on the bottom of the air baffle, disconnect the RAID
super capacitor module cable first.
To remove the air baffle, complete the following step:
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku: http://list.youku.com/albumlist/show/id_52222446.html
Note: The air baffle you want to remove might be different from the following illustrations, but the removal
method is the same.
92
ThinkSystem SR635 Maintenance Manual
To Next Page
Loading...
