Figure 57. Cable routing for server model with ten 2.5-inch SAS/SATA/NVMe drives, middle NVMe drive assembly and 
one 16i RAID adapter-2
Cable From To
8  SAS signal cable for front 
backplane
SAS/SATA 0–3 and SAS/SATA 4–7 
connectors on the front backplane
C0 and C1 connectors on RAID 
adapter in PCIe slot 1
9  SAS signal cable for front 
backplane
SAS/SATA 8–9 connector on the front 
backplane
C2 connector on RAID adapter in 
PCIe slot 1
M.2 module cable routing
Use the section to understand the cable routing for the M.2 module.
Chapter 2. Server components 67