Figure 145. M.2 adapter bracket removal
Adjust the retainer on the M.2 adapter
Use this information to adjust the retainer on the M.2 adapter.
“Read the
installation
Guidelines” on
page 79
“Power off
the server for
this task” on
page 11
“ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 82
Before adjusting the retainer on the M.2 adapter, locate the correct keyhole that the retainer should be
installed into to accommodate the particular size of the M.2 drive you wish to install.
To adjust the retainer on the M.2 adapter, complete the following steps:
Note: The M.2 adapter might be different from the following illustrations, but the adjustment method is the
same.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku: http://list.youku.com/albumlist/show/id_52222446.html
162 ThinkSystem SR635 Maintenance Manual
To Next Page
Loading...
