Lenovo ThinkSystem SR635 - Front I;O Assembly Replacement

Figure 156. RAID super capacitor module holder installation
Step 3. Open the retention clip on the holder, put the RAID super capacitor module into the holder and
press it down to secure it into the holder.
Figure 157. Installation of the RAID super capacitor module on the chassis
After installing the super capacitor module:
1. Connect the super capacitor module to an adapter with the extension cable that comes with the super
capacitor module. See “Super capacitor cable routing” on page 69.
2. Complete the parts replacement. See “Complete the parts replacement” on page 203.
Front I/O assembly replacement
Use this information to remove and install the front I/O assembly.
172 ThinkSystem SR635 Maintenance Manual