Four 3.5-inch SAS/SATA drives, middle drive cage and one 8i RAID adapter
Figure 29. Cable routing for server model with four 3.5-inch SAS/SATA drives, middle drive cage and one 8i RAID adapter
Cable From To
1 SAS signal cable for front
backplane
SAS connector on the front
backplane
C0 connector on the RAID adapter
2 NVMe signal cable for internal
backplane
NVMe 2–3 connector on the internal
backplane
PCIe connector 9 on the system
board
3 NVMe signal cable for internal
backplane
NVMe 0–1 connector on the internal
backplane
PCIe connector 7 and PCIe
connector 8 on the system board
Server model with eight 2.5-inch SAS/SATA drives
Use this section to understand the connectors on the backplane and internal cable routing for server model
with eight 2.5-inch SAS/SATA drives.
Figure 30. Connectors on the backplane for eight 2.5-inch SAS/SATA drives
1 SAS 1 connector
2 Power connector
3 SAS 0 connector
Chapter 2. Server components 39
To Next Page
Loading...
