Four 3.5-inch SATA drives and middle drive cage
Note: When the SAS/SATA backplanes are connected to PCIe connectors on the system board, only SATA
drives are supported. No SAS drives are supported.
Figure 28. Cable routing for server model with four 3.5-inch SATA drives and middle drive cage
Cable From To
1 SAS signal cable for front
backplane
SAS connector on the front
backplane
PCIe connector 6 on the system
board
2 NVMe signal cable for internal
backplane
NVMe 2–3 connector on the internal
backplane
PCIe connector 9 on the system
board
3 NVMe signal cable for internal
backplane
NVMe 0–1 connector on the internal
backplane
PCIe connector 7 and PCIe
connector 8 on the system board
38 ThinkSystem SR635 Maintenance Manual
To Next Page
Loading...
