If you are instructed to return the old rack latches, follow all packaging instructions and use any packaging
materials that are provided.
Install the rack latches
Use this information to install the rack latches.
“Read the
installation
Guidelines” on
page 79
To install the rack latches, complete the following steps:
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku: http://list.youku.com/albumlist/show/id_52222446.html
Step 1. On each side of the server, align the rack latch with the pin on the chassis. Then, press the rack
latch onto the chassis and slightly slide it forward as shown.
Figure 72. Rack latch installation
Step 2. Install the two screws to secure the rack latch on each side of the server.
Chapter 3. Hardware replacement procedures 97
To Next Page
Loading...
