Figure 69. ID label plate removal
To remove the rack latches, complete the following steps:
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku: http://list.youku.com/albumlist/show/id_52222446.html
Step 1. On each side of the server, remove the two screws that secure the rack latch.
Chapter 3. Hardware replacement procedures 95
To Next Page
Loading...
