• YouTube: https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku: http://list.youku.com/albumlist/show/id_52222446.html
Step 1. Remove all the installed drives from the drive bays in the middle cage. To remove the drives, do the
following:
a. Hold and lift the two blue handles.
b. Pull the hot-swap drives from the internal drive cage. See “Remove a hot-swap drive” on page
111.
Figure 133. Internal drive removal-1
Chapter 3. Hardware replacement procedures 153
To Next Page
Loading...
