Figure 147. M.2 drive slot
1 Slot 0
2 Slot 1
To install the M.2 adapter and M.2 drive, complete the following steps:
Notes:
• The M.2 adapter module is shipped with a loosen screw, but the screw is not necessarily used for the
installation.
• The M.2 adapter you want to install might be different from the following illustrations, but the installation
method is the same.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14
• Youku: http://list.youku.com/albumlist/show/id_52222446.html
Step 1. Install the internal riser assembly and install the super capacitor modules on the M.2/riser support
bracket. See “Install a super capacitor module on the M.2/riser support bracket” on page 168.
Step 2. Align the pins of the M.2 module bracket with the two holes on both sides of the M.2/riser support
bracket, and then install the bracket on the super capacitor modules.
164
ThinkSystem SR635 Maintenance Manual
To Next Page
Loading...
