Lenovo ThinkSystem SR635 - Page 208

• Updating serial number
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
• Updating asset tag
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
• Updating UUID
onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> [access_method]
Variable
Description
<m/t_model>
The server machine type and model number.
Type mtm xxxxyyy, where xxxx is the machine type and yyy is the server model number.
<s/n>
The serial number on the server.
Type sn zzzzzzz, where zzzzzzz is the serial number.
<asset_tag>
The server asset tag number.
Type asset aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa, where
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is the asset tag number.
<uuid_value>
The Universal Unique Identifier (UUID).
Type the generated 16-byte hexadecimal value.
[access_method]
The access method that you select to access the target server.
• Local KVM:
You can directly delete [access_method] from the command.
• Authenticated LAN:
In this case, specify below LAN account information at the end of the OneCLI
command:
--user <user_id> --password <password>
• Remote WAN/LAN:
In this case, specify below BMC account information and IP address at the end of the
OneCLI command:
--bmc <bmc_user_id>:xcc_password@<bmc_external_IP>
Notes:
– <bmc_user_id>
The BMC account name (1 of 12 accounts). The default value is USERID.
– <bmc_password>
The BMC account password (1 of 12 accounts).
198 ThinkSystem SR635 Maintenance Manual