Safety instructions
General safety and application notes for Lenze controllers
2
l
12
EDS84DG752 EN 7.0
2 Safety instructions
2.1 General safety and application notes for Lenze controllers
(in accordance with Low−Voltage Directive 2014/35/EU)
For your personal safety
Disregarding the following basic safety measures may lead to severe personal injury and
damage to material assets:
ƒ Use the product as intended.
ƒ Never operate the product if damages are visible.
ƒ Never operate the product unless fully assembled.
ƒ Do not make any technical changes to the product.
ƒ Only use the accessories approved for the product.
ƒ Only use original spare parts of the manufacturer.
ƒ Observe all regulations for the prevention of accidents, directives and laws
applicable on site.
ƒ Transport, installation, commissioning and maintenance work must only be carried
out by qualified personnel.
– Observe IEC 364 and CENELEC HD 384 or DIN VDE 0100 and IEC report 664 or DIN
VDE 0110 and all national regulations for the prevention of accidents.
– According to the basic safety information, qualified, skilled personnel are persons
who are familiar with the assembly, installation, commissioning, and operation of
the product and who have the qualifications necessary for their occupation.
ƒ Observe all specifications in this documentation.
– This is the condition for safe and troublefree operation and the achievement of the
specified product features.
– The procedural notes and circuit details described in this documentation are only
proposals. It is up to the user to check whether they can be transferred to the
particular applications. Lenze Drives GmbH does not accept any liability for the
suitability of the procedures and circuit proposals described.
ƒ Lenze inverters (frequency inverters, servo inverters, DC speed controllers) and the
accessory components can include live and moving parts (depending ontheir type of
protection) during operation. Surfaces can be hot.
– Nonauthorized removal of the required cover, inappropriate use, incorrect
installation or operation create the risk of severe injury to persons or damage to
material assets.
– For more information, please see the documentation.
ƒ High amounts of energy are produced in the drive. Therefore it is required to wear
personal protective equipment (body protection, headgear, eye and ear protection,
hand guard).
To Next Page
Loading...
