Accessories (overview)
Memory module
9
l
165
EDS84DG752 EN 7.0
9.3 Memory module
In the memory module, the parameters of the inverter are stored. The pluggable memory
module provides for a quick parameter set transfer to an inverter of the same design.
Possible reasons for a parameter set transfer:
ƒ Duplication of similar applications in a series of identical drives.
ƒ Restorage of an application after device replacement.
The required steps for a parameter set transfer are described in the software manual.
In order to remove the memory module, use a suitable screwdriver to lever the module out
at the upper and lower groove. In order to plug in the module, insert it into the slot and push
it with light pressure until end position is reached.
Mode Features Memory module
Memory module
E84AYM20S/M
l For 8400 BaseLine, 8400 motec
l Packaging unit: 12 items
To Next Page
Loading...
