Lenze 8400 motec - 4 Technical Data; General Data and Operating Conditions

Technical data
General data and operating conditions
4
l
30
EDS84DG752 EN 7.0
4 Technical data
4.1 General data and operating conditions
Conformity and approval
Conformity
CE
2014/35/EC LowVoltage Directive
EAC TP TC 004/2011
(TR CU 004/2011)
On safety of low voltage
equipment
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
EAC TP TC 020/2011
(TR CU 020/2011)
Electromagnetic
compatibility of technical
means
Eurasian Conformity
TR CU: Technical Regulation of
Customs Union
Approval
UR UL 508C
Power Conversion
Equipment, File No.
E170350
C
UR C22.2 No 274−13
Field Package approval
C
UL
US
UL 508C
C22.2 No 274−13
Power Conversion
Equipment, File No.
E132659
Protection of persons and equipment
Enclosure
l Close unused bores for cable glands with blanking plugs!
l Close unused connectors with protection covers or
blanking plugs!
EN 60529
8400 motec Set
Field Package without
switch
IP65
Field Package with service
switch / with service
switch and control
elements
IP54
Field Package with service
switch and protective
function
IP64
NEMA 250
8400 motec Set Type4X (interior)
Field Package without
switch
0.37...3.0kW Type12
4.0...7.5kW Type4X (interior)
Field Package with switch
0.37...3.0kW Type12
(Earth) leakage current EN 61800−5−1 > 3.5 mA AC, > 10 mA DC Observe the regulations and
safety instructions!
Total fault current In TN systems the following earth−leakage circuit breakers can
be used:
Motor mounting
0.37...3.0kW 30 mA, type B
4.0...7.5kW,
f
ch
= 8/16 kHz
30 mA, type B
4.0...7.5kW, f
ch
= 4 kHz 300 mA, type B
Wall mounting and
Lenze system cable
£3m
0.37...3.0kW 30 mA, type B
4.0...7.5kW,
f
ch
= 8/16 kHz
30 mA, type B