Lenze 8400 motec - Overview of Control Terminals

Product description
Overview of control terminals
3
l
29
EDS84DG752 EN 7.0
3.5 Overview of control terminals
The control terminals of the 8400motec inverters are always located in the
Communication Unit.
The type of fieldbus version, power class of the inverter, or motor frame size have no
influence on the availability of the device versions.
For 8400motec withouta fieldbus link, three types of control terminals are available:
ƒ BasicI/O
ƒ StandardI/O
ƒ ExtendedI/O
For 8400motec witha fieldbus link, two types of control terminals are available:
ƒ Without safety and with the I/O functions as for the standardI/O, but without an
analog input and relay output
ƒ With safety and all I/O functions as for the standardI/O
Connection options for Communication Unit
Plugs X3 X61 X4 X1
Name Fieldbus Safety Digital input/output Analog
input
Relay Holding
brake
Type SIA/SIB RFR DIx DO1 AI/AU COM/NO BD1/BD2
E84DGFCNNNx BasicI/O
1)
− 1x 2 x − − ü ü
E84DGFCSNNx StandardI/O
1)
− 1x 5 x ü ü ü ü
E84DGFCXNNx ExtendedI/O
1)
− 1x 8 x ü 2 x ü ü ü
E84DGFCAxNx
AS interface
−
1 x 5 x ü
− −
ü
E84DGFCAxJx ü ü ü
E84DGFCCxNx
CANopen
− − −
E84DGFCCxJx ü ü ü
E84DGFCGxNx
EtherNet/IP
− − −
E84DGFCGxJx ü ü ü
E84DGFCPxNx
PROFIBUS
− − −
E84DGFCPxJx ü ü ü
E84DGFCRxNx
PROFINET
− − −
E84DGFCRxJx ü ü ü
E84DGFCTxNx
EtherCAT
− − −
E84DGFCTxJx ü ü ü
ü Available
− Not available
1)
Without a fieldbus link