DHCP Client
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in four LAN
ports share the same IP to ISP through WAN port. The
connection type can be setup in WAN page by using DHCP
Client.
1. From the WAN Access Type drop-down list, select DHCP
Client setting determined by your Network Administrator or
ISP.
2. Click Next>>.
PPPoE
In this mode, the device is supposed to connect to internet via
ADSL/Cable Modem. The NAT is enabled and PCs in four LAN
ports share the same IP to ISP through WAN port. The
connection type can be setup in WAN page by using PPPoE.
1. From the WAN Access Type drop-down list, select PPPoE
setting determined by your Network Administrator or ISP.
2. Enter User Name for example 1234.
3. Enter Password for example 1234.
4. Click Next>>.
To Next Page
Loading...
