LevelOne WGR-8031 - Configuring WPA2 (AES) HEX (64 Characters) Security

77
Configuring WPA2 (AES) Passphrase security
The example set in this section is for WPA2 (AES) Passphrase
encryption.
1. From the Encryption drop-down list, select WPA2 (AES)
setting.
2. From the Pre-Shared Key Format drop-down list, select
Passphrase setting.
3. Type the Pre-Shared Key.
4. Click Next>>.
Configuring WPA2 (AES) HEX (64 characters) security
The example set in this section is for WPA2 (AES) HEX (64
characters) encryption.
5. From the Encryption drop-down list, select WPA2 (AES)
setting.
6. From the Pre-Shared Key Format drop-down list, select
HEX (64 characters) setting.
7. Type the Pre-Shared Key.
8. Click Finished.