LevelOne WGR-8031 - Configuring WPA2 (AES) HEX (64 Characters) Security

89
Configuring WPA2 (AES) HEX (64 characters) security
The example set in this section is for WPA2 (AES) HEX (64
characters) encryption.
1. From the Encryption drop-down list, select WPA2 (AES)
setting.
2. From the Pre-Shared Key Format drop-down list, select
HEX (64 characters) setting.
3. Type the Pre-Shared Key.
4. Click Finished.
5. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...