LevelOne WGR-8031 - Configuring WEP 128 Bit ASCII (13 Characters) Security

86
6. Change setting successfully! Do not turn off or reboot the
Device during this time. Please wait 20 seconds ...
Configuring WEP 128bit ASCII (13 characters) security
The example set in this section is for 128bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 128-bit setting.
3. From the Key Format drop-down list, select ASCII (13
characters) setting.
4. Type the Key Setting.
5. Click Finished.