LevelOne WGR-8031 - Configuring WEP 64 Bit ASCII (5 Characters) Security; Configuring WEP 64 Bit Hex (10 Characters) Security

75
Configuring WEP 64bit ASCII (5 characters) security
The example set in this section is for 64bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 64-bit setting.
3. From the Key Format drop-down list, select ASCII (5
characters) setting.
4. Type the Key Setting.
5. Click Next>>.
Configuring WEP 64bit Hex (10 characters) security
The example set in this section is for 64bit encryption.
6. From the Encryption drop-down list, select WEP setting.
7. From the Key Length drop-down list, select 64-bit setting.
8. From the Key Format drop-down list, select Hex (10
characters) setting.
9. Type the Key Setting.
10. Click Next>>.