LevelOne WGR-8031 - Configuring WEP 128 Bit ASCII (13 Characters) Security; Configuring WEP 128 Bit Hex (26 Characters) Security

76
Configuring WEP 128bit ASCII (13 characters) security
The example set in this section is for 128bit encryption.
1. From the Encryption drop-down list, select WEP setting.
2. From the Key Length drop-down list, select 128-bit setting.
3. From the Key Format drop-down list, select ASCII (13
characters) setting.
4. Type the Key Setting.
5. Click Next>>.
Configuring WEP 128bit Hex (26 characters) security
The example set in this section is for 128bit encryption.
6. From the Encryption drop-down list, select WEP setting.
7. From the Key Length drop-down list, select 128-bit setting.
8. From the Key Format drop-down list, select Hex (26
characters) setting.
9. Type the Key Setting.
10. Click Next>>.