LevelOne WGR-8031 - Security Settings

151
The Fragmentation Threshold defines the number of bytes used for the
fragmentation boundary for directed messages.
RTS Threshold
RTS stands for “Request to Send”. This parameter controls what size
data packet the low level RF protocol issues to an RTS packet. The
default is 2347.
Beacon Interval
Choosing beacon period for improved response time for wireless http
clients.
IAPP
Disable or Enable IAPP
Protection
A protection mechanism prevents collisions among 802.11g nodes.
Aggregation
Disable or Enable Aggregation
Short GI
Disable or Enable Short GI
WLAN Partition
Disable or Enable WLAN Partition
STBC
Disable or Enable STBC
LDPC
Disable or Enable LDPC
TX
Beamforming
Disable or Enable TX Beamforming
RF Output
Power
TX Power measurement.
Security
This page allows you setup the wireless security. Turn on WEP
or WPA by using Encryption Keys could prevent any
unauthorized access to your wireless network. To access the
Wireless Network Security page:
1. From the head menu, click on Wlan2.