LevelOne WGR-8031 - Page 95

95
Field
Description
Select SSID
Select the SSID
Encryption
Configure the Encryption to Disable, WEP, WPA , WPA2 or WPA-Mixed
Use 802.1x
Authentication
Use 802.1x Authentication by WEP 64bits or WEP 128bits
Authentication
Configure the Authentication Mode to Open System, Shared Key or
Auto
Key Length
Select the Key Length 64-bit or 128-bit
Key Format
Select the Key Format ASCII (5 characters), Hex (10 characters), ASCII
(13 characters) or Hex (26 characters)
Encryption Key
Enter the Encryption Key
WPA
Authentication
Mode
Configure the WPA Authentication Mode to Enterprise (RADIUS) or
Personal (Pre-Shared Key)
WPA Cipher
Suite
Configure the WPA Cipher Suite to AES
Field
Description
WPA2 Cipher
Suite
Configure the WPA2 Cipher Suite to AES
Pre-Shared Key
Format
Configure the Pre-Shared Key Format to Passphrase or HEX (64
characters)
Pre-Shared Key
Type the Pre-Shared Key
Enable Pre-
Authentication
According to some of the preferred embodiments, a method for
proactively establishing a security association between a mobile node
in a visiting network and an authentication agent in another network to
which the mobile node can move includes: negotiating pre-
authentication using a flag in a message header that indicates whether
the communication is for establishing a pre-authentication security
association; and one of the mobile node and the authentication agent
initiating pre-authentication by transmitting a message with the flag set
in its message header, and the other of the mobile node and the
authentication agent responding with the flag set in its message header
only if it supports the pre-authentication. Enable/disable pre-
authentication support. Default: disable.
Authentication
RADIUS Server
Port: Type the port number of RADIUS Server
IP address: Type the IP address of RADIUS Server
Password: Type the Password of RADIUS Server