Diagnostic aids 3-23
7002-xxx
SCANNER TESTS
ASIC Test
A pattern appears and ASIC Test Passed displays. If xxxxxx displays, the test was unsuccessful.
Press Stop (
) to return to the SCANNER TESTS menu.
Feed Test
To run the Scanner Feed test:
1. Touch to select Feed Test from the SCANNER TESTS menu.
2. The panel displays the setting's current value [setting's current value] . Use the arrows to select from
Letter, Legal, or A4.
3. Touch START to begin.
Feed Test Testing… displays.
Press 4 to exit the test.
4. Touch Back to return to the Diagnostics Menu.
Scanner Manual Registration
Note: Do not change these settings unless requested to do so by your next level of support
Sensor Tests
The following tests are available:
ADF cover Open
ADF Exit Sensor
ADF Interval
ADF Jam Removal
ADF Paper Present
FB Cover Open
Home Sensor
SCAN_QRY_PAPER_SIZE_ADF_LONG
SCAN_QRY_PAPER_SIZE_ADF_WIDTH1
SCAN_QRY_PAPER_SIZE_ADF_WIDTH2
SCAN_QRY_PAPER_SIZE_ADF_WIDTH3
SCAN_QRY_PAPER_SIZE_FB_LONG
SCAN_QRY_PAPER_SIZE_FB_MEDIUM
SCAN_QRY_PAPER_SIZE_FB_SHORT
SCAN_SENSOR_FIRST_SCAN_BIT
SCAN_SENSOR_SECOND_SCAN_BIT
To Next Page
Loading...
