Repair information 4-5
7002-xxx
4. Touch Start.
The touchscreen displays DO NOT POWER OFF Scanner Registration. When complete, a screen
similar to the following appears:
5. Touch Continue.
Note: After the registration test is complete, success or failure is indicated on the touchscreen.
Note: If the Automatic Scanner Registration displays a failure, repeat the process making sure the paper
is aligned as correctly as possible. If the process fails again, contact the next level of support.
6. Verify the results by running a copy of a quick test page created during MFP registration. See “Print tests”
on page 3-6 for more information.
Manual registration
Note: Manual registration should be performed only after automatic registration is performed. The primary
purpose of manual registration is to fine-tune the automatic adjustments already made. Contact your next level
of support for assistance in performing the Manual Scanner Registration.
Scanner registration
successfully completed
Continue
To Next Page
Loading...
