2-4 Service Manual
7002-xxx
Home screen and Home screen buttons
After the MFP is turned on and a short warm-up period occurs, the LCD shows the following basic screen which
is referred to as the Home screen. Use the Home screen buttons to initiate an action such as copy, fax, or scan,
to open the menu screen, or to respond to messages.
Buttons and touchscreen icon buttons
11 USB Direct interface The host Universal Serial Bus (USB) direct interface on the operator panel is used
to plug in a USB flash memory device and print any Portable Document Format
(PDF) [.pdf file], Joint Photographic Experts Group (JPEG) [.jpeg or .jpg file],
Tagged Image File Format (TIFF) [.tiff or .tif file], Graphics Interchange Format
(GIF) [.gif file], Basic Multilingual Plane (BMP) [.bmp file], Portable Network
Graphics (PNG) [.png file], PiCture eXchange (PCX) [.pcx file], and PC Paintbrush
File Format [.dcx file] files.
The USB direct interface can also be used to scan a document to a USB flash
memory device using the PDF, TIFF, or JPEG formats.
12 Home
(only on model X642e)
Returns the LCD to the home screen.
13 Help Tips
(only on model X642e)
Accesses the context-sensitive Help feature.
14 Menu
(only on model X642e)
Accesses the menus. These menus are only available when the MFP is in the
Ready state.
15 Contrast icon
(only on model X642e)
Identifies the location of the contrast wheel. Look on the left side of the MFP near
this icon to locate the contrast wheel which adjusts the contrast on the LCD.
Buttons and touchscreen icon buttons (refer to Menus & Messages for comprehensive list)
Models X644e,
X646e
Model X642e Button name Function
Copy Touch to access the Copy menus.
If the home screen is shown, press a number to access the
Copy menus, too.
Callout Operator panel item Function
Copy
To Next Page
Loading...
