3-24 Service Manual
7002-xxx
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold 2 and 6 buttons simultaneously.
3. Turn on the printer.
4. Release the buttons after 10 seconds.
Available menus
Note: Some menus are not available, depending on the configuration of the printer.
Touch Exit Config Menu to exit the Configuration Menu and Resetting the Printer displays. The printer
performs a POR, and the printer returns to normal mode.
Maintenance Page Counter See “Maintenance Page Count” on page 3-25
Reset Maintenance Counter See “Reset Maintenance Counter” on page 3-25
Print Quality Pages See “Print Quality Pages” on page 3-26
SIZE SENSING See “SIZE SENSING” on page 3-26
Panel Menus See “Panel Menus” on page 3-27
PPDS Emulation See “PPDS Emulation” on page 3-27
Factory Defaults See “Factory Defaults” on page 3-28
Energy Conserve See “Energy Conserve” on page 3-28
Min Copy Memory See “Min Copy Memory” on page 3-29
Format Fax Storage See “Format Fax Storage” on page 3-29
ADF Edge Erase See “ADF Edge Erase” on page 3-29
FB Edge Erase See “FB Edge Erase” on page 3-30
Automatic Scanner Registration See “Automatic Scanner Registration” on page 3-30
EVENT LOG (print log only) See “EVENT LOG” on page 3-31
Paper Prompts See “Paper Prompts” on page 3-31
Env Prompts See “Envelope Prompts” on page 3-32
Jobs On Disk See “Jobs On Disk” on page 3-32
Disk Encryption See “Disk Encryption” on page 3-32
Wipe Disk See “Wipe Disk” on page 3-33
Font Sharpening See “Font Sharpening” on page 3-34
Require Standby See “Require Standby” on page 3-34
LES App[lications See “LES Applications” on page 3-34
Key Repeat Initial Delay See “Key Repeat Initial Delay” on page 3-35
Key Repeat Rate See “Key Repeat Rate” on page 3-35
Wiper Message See “Wiper Message” on page 3-35
Exit
Config Menu
Exit
Config Menu
To Next Page
Loading...
