2-38 Service Manual
7002-xxx
User status displays.
User status displays
Code
Sub
code
Display text Description/action
Bin [x] Full x represents the number of the output bin that is full when the MFP bins are
linked.
Remove print media from the bins. The message clears once the output
level of the linked bins is no longer full.
Busy The MFP is busy receiving, processing, or printing data.
Press Stop to access the job queue.
Deleting selected
job(s)
The Delete button is touched after jobs have been selected.
Flushing Buffer The MFP flushes corrupted data and discards the current print job.
Hex Trace The MFP is in Hex Trace mode.
Hex Trace isolates the source of a print job problem. When Hex Trace is
active, all data sent to the MFP prints in hexadecimal and character
representation.
Exit Hex Trace to print jobs normally. To exit Hex Trace, unplug the MFP.
Insufficient
resources. Try
again when the
system is idle.
There are not enough system resources at this time.
Try again after the current job is complete.
Invalid or
incorrect
password.
An incorrect password is entered.
Touch Continue to return to the screen to enter a correct password.
Invalid PIN. An incorrect Personal Identification Number (PIN) is entered.
Touch Continue to return to the screen to enter a correct PIN.
Job cannot be
deleted
A job in the job list is touched, but it cannot be canceled.
Maintenance The MFP maintenance counter has exceeded its limit, so the MFP requires
maintenance.
Replace the maintenance items. If necessary, reset the MFP maintenance
counter.
Network
Network [x]
Network [x], [y]
A network interface is the active communication link.
Wait for the message to clear.
Notes:
• The current interface appears on the Menu Settings Page. Interfaces
shown without an x or y means the active host interface is a standard
interface.
• x indicates the active interface is connected to the MFP through PCI
connector x.
• x, y indicates the active interface is connected to the MFP through
channel y on PCI connector x, or that x equals 0 on the standard
network interface.
No jobs selected The Delete button is touched when no jobs are selected.
To Next Page
Loading...
