Repair information 4-71
7002-xxx
7. Press the two tabs (E) that limit range of motion, and rotate the LCD touchscreen up until it disconnects.
Multipurpose feeder/lower front cover assembly removal
1. Open the multipurpose tray to a position that allows the left and right tray hinge slots (A) to align with the
D-shape mounting posts (B). Pull upward on each tray hinge to remove the tray from the two mounting
posts.
Warning: Be careful not to break or stress the hinges.
2. Remove the multipurpose tray/lower front cover assembly.
E E
To Next Page
Loading...
