4-108 Service Manual
7002-xxx
LCD inverter card assembly removal
1. Remove the printer left side cover. See “Printer left side cover removal” on page 4-56.
2. Remove the operator panel left side cover. See “Operator panel left cover assembly
removal” on page 4-61.
3. Remove the two cables (A).
4. Remove the two screws (B).
Note: For model X642e, you may need to carefully use a screw to disconnect the LCD display HV
cable (C).
Models X644e/X646e Model X642e
Model X642e
To Next Page
Loading...
