6-2 Service Manual
7002-xxx
Cleaning the scanner glass, cushions, and strips
1. Open the document cover.
2. Dampen a clean, lint-free cloth or cotton swab with isopropyl alcohol.
3. Clean the following with the cloth or swab:
• Flatbed contact glass
• Flatbed white cushion
• Front flatbed white strip
• Glass slit in flatbed glass holder (see step 4).
4. Remove the flatbed glass holder and clean both sides of the glass slit. See “Upper glass holder
removal” on page 4-53.
Warning: Be careful not to touch the white calibration strip (A) on the underside of the scanner flatbed
glass holder.
All models
To Next Page
Loading...
