Lexmark X642e - Main Fan Removal

Repair information 4-111
7002-xxx
Main fan removal
1. Remove the ADF scanner assembly. See “ADF complete assembly removal” on page 4-15.
2. Remove the flatbed scanner assembly. See “Flatbed scan assembly removal” on page 4-38.
3. Remove the printer left side cover. See “Printer left side cover removal” on page 4-56
4. Open the left side cover.
5. Remove the outer shield. See “Printer outer shield removal” on page 4-126.
6. Remove the two screws (A) securing the upper plenum.
7. Remove the upper plenum.