3-32 Service Manual
7002-xxx
Envelope Prompts
This setting controls the tray the user is directed to refill when a specific envelope size is out. The selections are
Auto (default), MP Feeder, and Manual Env.
1. Touch to select Envelope Prompts from the Configuration Menu.
The panel displays the setting's name in the header and [setting's current value] below the header
row.
2. Touch or to change the value.
The values are Auto (default), MP Feeder, and Manual Envelope.
3. Touch Submit to save the change.
Jobs On Disk
Model X646e only. If the hard disk is installed, Jobs On Disk allows the user to delete buffered jobs saved on the
disk. The values are Delete and Do Not Delete.
To delete jobs saved on the disk:
1. Touch to select Jobs On Disk from the Configuration Menu.
2. Touch to select Delete to decrease the setting's value.
3. Touch or to change the value.
Touch Back to cancel and return to the Configuration Menu.
Disk Encryption
Model X646e only. If a hard disk is installed, Disk Encryption selects whether the data on the disk is encrypted or
not. The values are Disable and Enable.
This setting determines if the printer encrypts the information that it writes to the hard disk. The values are
Disable and Enable.
Warning: If the value is changed from Enable to Disable or from Disable to Enable, then the printer completely
formats the hard disk. All information on the disk will be unrecoverable.
To change this setting:
1. Touch to select Disk Encryption from the Configuration Menu.
Note: If an advanced password has been established, you must enter this password in order to change
the setting. If no advanced password exists, you can establish one by using the keyboard that appears on
the LCD.
2. Touch next to either Enable or Disable.
If you remove an encrypted disk from a device and then try to install another disk, Disk Corrupted.
Reformat? appears on the LCD. You can format the newly installed disk or remove it from the device.
To Next Page
Loading...
