4-68 Service Manual
7002-xxx
5. Remove the operator panel left side cover. See “Operator panel left cover assembly removal” on
page 4-61.
6. Disconnect the cable (D) from the LCD inverter card assembly.
7. Remove the touchscreen bezel. See “Touchscreen bezel removal” on page 4-66.
8. Press the two tabs (E) that limit range of motion, and rotate the LCD touchscreen up until it disconnects.
9. Set the LCD touchscreen aside.
Warning: Avoid touching or placing pressure on the touchscreen. Do not handle roughly or drop.
D
To Next Page
Loading...
