Locations and connections 5-25
7002-xxx
CN9 to ADF exit sensor, ADF second scan sensor 1 Ground
2 nADF EXIT
3+5 V dc IN
4Ground
5+5 V dc IN
6 n2ND SCAN
7Ground
8 nADF COVER
9+5 V dc IN
CN10 to jam remove sensor, ADF paper present
sensor, interval sensor, first scan sensor
1Ground
2 nJAM REMOVE
3+5 V dc IN
4Ground
5 nADF PRESENT
6+5 V dc IN
7Ground
8 nADF INTERVAL
9+5 V dc IN
10 Ground
11 +5 V dc IN
12 n1ST SCAN
Motor drive board connector pins (continued)
Connector CN pin no. Signal
To Next Page
Loading...
