I-6 Service Manual
7002-xxx
inner paper deflector assembly
4-101
inner shield—model X642e 4-130
inner shield—models X644e/X646e 4-131
input sensor 4-102
integrated tray autocompensator assembly 4-103
integrated tray autocompensator pick roll assembly
4-105
interface card assembly 4-107
LCD inverter card assembly 4-108
LCD touchscreen—model X642e 4-69
LCD touchscreen—models X644e/X646e 4-67
left and right frame extensions 4-73
left cover handle holder 4-72
low voltage power supply (LVPS) 4-109
lower front cover assembly 4-71
lower paper deflector 4-117
main drive assembly 4-113
main fan 4-111
MPF arm assembly 4-116
MPF pick tire removal 4-118
MPF solenoid assembly 4-119
MPF⁄ lower front cover assembly 4-71
operator panel left cover assembly 4-61
operator panel right cover assembly 4-64
paper alignment assembly 4-122
paper bin full sensor flag 4-124
paper size sensing board 4-125
pass thru plate 4-74
power takeoff shaft and spring 4-126
printer left side cover 4-56
printer outer shield 4-126
printhead 4-127
redrive assembly 4-128
redrive door 4-58
right cover handle holder 4-72
right cover removal 4-58
signature button contact assembly 4-129
system board and inner shield—model X642e
4-130
system board and inner shield—models X644e/
X646e
4-131
toner sensor 4-132
touchscreen bezel 4-66
transfer roll assembly 4-132
upper front cover hinge assembly 4-136
upper paper deflector assembly 4-138
upper sub cover 4-55
upper tray cover 4-133
upper tray cover (paper support) 4-56
USB card 4-139
scanner ADF and flatbed
ADF attach screws
4-13
ADF CCD module assembly 4-14
ADF complete assembly 4-15
ADF front cover 4-6
ADF pick assembly 4-7
ADF rear cover 4-7
ADF top cover 4-9
ADF upper entrance guide assembly 4-16
CCD belt tension spring 4-19
CCD beth removal 4-17
cover closed actuator 4-22
cover closing actuator 4-21
document tray assembly 4-23
flatbed CCD module assembly 4-28
flatbed CCD ribbon cable 4-24
flatbed contact glass 4-31
flatbed interconnect card removal 4-33
flatbed paper length sensor assembly 4-35
flatbed scan assembly 4-38
flatbed scan motor assembly 4-41
flatbed white cushion 4-32
front flatbed cover 4-11
hard disk 4-44
home sensor 4-46
lower exit guide assembly 4-47
pickup solenoid assembly 4-48
scan cover (flatbed) removal 4-11
scanner control card 4-48
scanner flatbed glass holder assembly 4-50
scanner left side cover 4-10
scanner right side cover 4-12
separator assembly torque limiter 4-52
upper glass holder 4-53
Require Standby 3-34
right cover handle holder removal 4-72
right cover removal 4-58
S
safety information xvii
safety inspection guide 6-1
scanner
parts catalog
7-8, 7-16, 7-17, 7-18, 7-19, 7-20, 7-22
specifications 1-4
Scanner Automatic Registration 4-4
scanner control card
connectors
5-17
removal 4-48
Scanner Manual Registration 3-23
scheduled maintenance 6-1
sensors
flatbed paper length sensor assembly
4-35
fuser exit sensor 4-82
fuser narrow media sensor 4-88
home sensor 4-46
input 4-102
locations 5-1, 5-2
output bin sensor, integrated paper tray 2-156
paper bin full 4-124
paper size sensing board 4-125
parts catalog (scanner) 7-20
toner 4-132
serial number 3-18
serial wrap tests 3-10
To Next Page
Loading...
