Diagnostic information 2-41
7002-xxx
Answering The MFP is answering a fax call.
Call complete A fax call is completed.
Connect <x>bps The fax is connected. <x> is the baud rate per second.
Dialing A fax number is dialed. If the number is too long to fit on the screen only the
word Dialing appears.
Fax failed The fax failed to send.
Job stored for
delayed
transmission.
The scanning completes for a delayed send fax job.
Line busy A fax number is dialed, but the fax line is busy.
No answer A fax number is dialed, but no connection is made.
No dial tone The MFP does not have a dial tone.
Queued for sending The scanning process of a fax job completed, but it is not sent yet because
another fax job is being sent or received. As this one job waits for its turn,
this message appears for three seconds.
Receive complete The MFP has received an entire fax job.
Receiving page [n] The MFP receives page [n] of the fax job, where n is the number of the page
received.
Sending page [n] The MFP sends page [n] of the fax job, where n is the number of the page
sent.
Set clock The Real Time Clock is not set. This message appears if no other fax status
message appears. It remains until the clock is set.
Set the clock.
Waiting for redial The MFP is waiting to redial the fax number.
User status displays (continued)
Code
Sub
code
Display text Description/action
To Next Page
Loading...
