2-46 Service Manual
7002-xxx
Load manual feeder
with [Custom Type
Name]
Occurs when the MFP receives a manual feed request that specific print
media be loaded into the multipurpose feeder. The print media is previously
defined as a custom type from Custom 1 through Custom 6. The custom
type name appears on the operator panel.
Touch Continue.
• If print media is in the multipurpose feeder, the job continues to print.
• If there is no print media in the multipurpose feeder, all requests for
additional pages are automatically overridden, and print media is
selected from an automatic source.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
Load manual feeder
with [size]
Occurs when the MFP receives a manual feed request for a specific size of
print media when none is loaded into the multipurpose feeder.
Feed a sheet of print media into the multipurpose feeder to clear the
message and continue the job.
Touch Continue if print media is in the multipurpose feeder. The job
continues.
Touch Continue if there is no print media in the multipurpose feeder. All
requests for additional pages are automatically overridden, and print media
is selected from an automatic source.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
Load manual feeder
with [type] [size]
Occurs when the MFP receives a manual feed request for a specific size
and type of print media when none is loaded into the multipurpose feeder.
Touch Continue if print media is in the multipurpose feeder. The job
continues.
Touch Continue if there is no print media in the multipurpose feeder. All
requests for additional pages are automatically overridden, and print media
is selected from an automatic source.
Touch Automatically select media to override manual requests for Manual
Paper and Manual Env for the rest of the print job. All requests for
additional pages are automatically overridden and print media is selected
from an automatic source.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
Load [src] with
[Custom String]
Occurs when a source is loaded with an incorrect print media size and type
as specified in the Paper Menu.
Touch Continue. Load the specified source that is set for the requested size
and type.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
Load [src] with
[Custom Type Name]
Occurs when a source is loaded with an incorrect print media size and type
as specified in the Paper Menu.
Touch Continue. Load the specified source that is set for the requested size
and type.
Touch Cancel Job to cancel the current job if needed.
Touch Reset Active Bin to change to another linked bin.
User attendance messages (continued)
Code
Sub
code
Primary message Description/action
To Next Page
Loading...
