Linde H35D - Page 192

5 Maintenance
Load lift system
¾ Tighten fixing screws (1) to 85 Nm.
¾ Tighten fixing screws (2) to 85 Nm.
¾ Tighten fixing screws (3) to 50 Nm
.
¾ Tighten fixing screws (7) to 145 Nm (for H 25
forklift trucks with fork carriage load-bearing
class 2A).
¾ Tighten fixing screws (7) to 235 Nm (for
H 30 / H 35 forklift trucks with fork carriage
load-bearing class 3A).
¾ Lubricate slide guides (4) with lubricating
grease.
¾ Apply lubricating grease to lubricating nip-
ples (5) of guide shoes until grease escapes
at the side.
¾ Apply lubricating grease to lubricating nip-
ples (6) of guide rollers until grease escapes
at the side.
182 Operating Instructions – 393 807 1001 EN – 08/2008