6 Technical data
Specified vibration characteristic as per EN
12096
Measured
vibration
characteristic
a
W.ZS
=
0.9 m/s
2
Uncertainty
K
=
0.3 m/s
2
Specified vibration characteristic for hand-
arm vibrations
Vibration characteristic <2.5m/s
2
NOTE
The vibration characteristic for bodily vibra-
tions cannot be used to determine the actual
load level of vibrations during operation. This
depends on the operating conditions (state
of pathway, method of operation etc.) and
should therefore be determined on site, where
appropriate. It is mandatory to specify the
hand-arm vibrations even where the values do
not indicate any hazard, as in this case.
216 Operating Instructions – 393 807 1001 EN – 08/2008
To Next Page
Loading...
