Circuit diagrams 7
Wiring diagram
Legend
2B6 Third auxiliary hydraulics joystick, 646-648
:3 − Auxiliary 3
:4 − Auxiliary 3 reference
2B11 End position sensor 1, 658-661
2B12 End position sensor 2, 672-674
5E20 10W centre rear sidelight, 688
F16 7.5A fuse (terminal 15), 666
5F7 5A fuse, 691
5H22 21W centre rear brake light, 691
2K1 Third auxiliary hydraulics changeover relay,
662-666
5K2 Brake light relay, 691-693
N1 LHC electronic control system, 643-655
:9 − auxiliary 3
:20 − 0V third auxiliary hydraulics
changeover relay
:25 − 12V third auxiliary hydraulics
changeover relay
:64 − Auxiliary 3 reference
:84 − end position 1
:96 − Lift earth sensor
:99 − end position 2
116 − 5V lift sensor
5S2 Switch for working headlights positions 3
and 4, 682-685
2V11 Free-wheeling diode for third auxiliary
hydraulics valve, 666
2V12 Free-wheeling diode for third auxiliary
hydraulics valve, 669
X10 18-pin plug connector, 693
2X9 6-pin plug connector, 658-674
2X10 6-pin plug connector, 658-674
2X11 10-pin plug connector, 658-674
2X13 6-pin plug connector, 646-648
5X20 4-pin plug connector (brake/tail light), 688,
691
2Y11 Third auxiliary hydraulics valve, 665
2Y12 Third auxiliary hydraulics valve, 668
Wire colours
BK Black
BN Brown
BU Blue
GN Green
GY Grey
OG Orange
RD Red
VT Violet
WH White
YE Yellow
The number in front of the wire colour refers
to the wire cross-section.
Wires with unspecified cross-section = 0.75
mm
2
Notes
(I) Third auxiliary hydraulics with third joystick
(II) Centre rear brake/tail light
(a) For electronic controller (N1:41)
Operating Instructions – 393 807 1001 EN – 08/2008 253
To Next Page
Loading...
