Operation 4
Standard equipment
¾ Release the parking brake(1), as appropri-
ate to the version.
Forwards travel
¾ Move the direction of travel lever (4) for-
wards.
¾ Press the accelerator pedal (3
) carefully.
The driving speed of the truck increases the
further the pedal is pressed down.
NOTE
Pressing down the accelerator pedal hard is
to no advantage as the maximum acceleration
rate is controlled automatically.
Reverse travel
¾ Move the direction of travel lever (4) back-
wards.
¾ Press the accelerator pedal (3) c
arefully.
The truck will reverse slowly or quickly de-
pending on the position of the accelerator
pedal.
Changing direction of travel
¾ Release accelerator pedal.
The hydrostatic drive will act a
saservice
brake.
4
d3921362
¾ Operate the direction of travel lever (4) for
the opposite direction of travel.
The forklift truck will now accelerate in the
specified direction.
The direction of travel lever ca
nbeswitched
over directly. The hydrostatic
drive brakes
thetruckuntilitcomestoastan
dstill and then
accelerates in the opposite dir
ection.
Operating Instructions – 393 807 1001 EN – 08/2008 43
To Next Page
Loading...
