LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 97
By choosing this function, a window dialog box will occur to remind users that needs to reboot program：
Figure 1.8-14 PARAM LEAD-IN SCREEN
If executing this function. Selecting the “renew parameter” item from the popup dialog box after pressing
confirm button. A dialog box of key-in parameter renew source path occurs after pressing confirm button.
Figure 1.8-15 Reminding Users to Reboot after Key-in Parameter

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English