LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
112 LNC Technology Co., Ltd.
1.10.6 【Switch user】
In order to prevent end-user to change some parameters and make the machine error, our controller provides
two identity for using, End-User and Machine Makers. With different identity, there will also have different
sub-functions keys.
 End-Users
Press【NC. SYS】 and go to parameter setting page, there are 4 sub-functions files, including 【servo】、
【spindle】、【ZRN】、【OP】, End-Users has relatively few functions.
When changing to End-User, you don’t have to input password and you can change to End-User. But if you
want to change parameter setting, you need to input password to confirm, the default password is『0000』
 Machine Makers
Press【NC. SYS】 and go to parameter setting page, there are several sub-function keys, including
【SRVO】、【MAC】、【SPDL】、【MPG】、【COMP】、【HOME】、【OPER】and【INCOMP】
When changing to Machine Maker, you will need to input default password 『0000』 while log in and change
parameters.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English