LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
90 LNC Technology Co., Ltd.
1.8.6 SYSUPD
This function can be executed only under that condition that CNC is not ready. Please pressing【SYSUPD】button
after pressing the EMG-STOP key. At this time, a screen which function is selected by the cursor (like Figure
2.10-3) will occur. This screen allows users to select the wanted working item. Each function is listed as below：
Figure 1.8-9 System Upgrade Screen

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English