LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 99
1.9 SOFTPL
Press <SOFTPL> to enter into the diagrams display screen. There are 7 function selection switches which are
corresponding to 7 function buttons on the screen and they are【M LOCK】,【DRY RUN】,【OP STOP】,【MST
SKIP】,【MPG DRY】,【Z IGNORE】
Figure 1.9-1 Soft Panel Function Screen
Using these corresponding functions switches separately. The function picture changes from red to green on the
screen, which means the function is enabled. Turning it back again to disable the function

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English