LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
104 LNC Technology Co., Ltd.
1.10.3 TLIM
Press【TLIM】and enter to this page.
This function can let machine makers or distributor to trace or give limit time to customers which have
installments. Machine makers can lock or unlock this area to control.
 How the system judge the due day and the condition when the system due
System will check the due date when the system power on, the checking way is as below：
1. If system’ date is more then the due date.
2. Shipping date from factory + users’ cumulative date（note）> the due date.
（Note）Because this system allows users to change the setting of date, therefore cumulative time is
needed, the system will add hours and minutes to become dates.
Any of these two conditions above is effective, system will judge it as due, at this time,（CYCLE START）
function will not be effective. If you press（CYCLE START）after due date, the system will show ALARM
message as below：
【OP 1017 system has expired, please contact your machines makers.】

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English