LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
38 LNC Technology Co., Ltd.
1.4.2 PROCHK (Program Checking)
Under auto mode, pressing【PROCHK】function buttons to enter into the automatic program checking screen as
below figure. Sub-function buttons, at right side of the screen, provide checking options.
 【SINGLE CHECK】
You will see program content at the upper side of the monitor. The program that was executing right now will
be highlighted. At the down side of the monitor is the absolute coordinate, dist to go，M/S/G/T CODE, exact
speed and so on.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English