LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
LNC Technology Co., Ltd. 111
1.10.5 【Change password】
Press【CHGUSR】and the screen will show changing password dialogue. User can change password of
modifying parameter function. However, password of exit is not to be changed here.
 End-User
If you press【CHGUSR】under End-User’s status, the password you changed will be under End-User.
1. Input current End-User’s password.
2. Input new End-User’s password
3. Input again the new password
Press【OK】to finish.
 Machine Maker
If you press【CHGUSR】under Machine maker’s status, the password you changed will be under Machine
Maker.
1. From End-User to enter in Machine Maker’s password.
2. Under Machine Maker Status to change parameter’s password.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English