LNC T6 Series User Manual

LNC-Lathe New T6-Series
CNC Operation
40 LNC Technology Co., Ltd.
1.4.3 MDI
Pressing【MDI】key to entry into MDI page under MDI mode. You can see MDI page as below: At this page, user
can execute directly the single block program that just input. Systems also allow multi-line programs, so called
multi-line MDI.
The operation is as below: Users key-in command and then press <INPUT>. Then, the command will occur at
the left section of the main page. Then, pressing Cycle Start key and the command will be executed and related
data will be displayed. Using this method to do test running is much safer and more time-efficiency.
Also systems provide【CLR】【 DELLN】to help users.

LNC T6 Series Specifications

General

Brand	LNC
Model	T6 Series
Category	Controller
Language	English